Specifications

Hull

  • 10mm Base plate – 6mm Hull sides
  • 5mm Cabin Sides – 4mm Roof
  • Base Framing 50 x 50 x 6mm angle
  • Hull side framing 50 x 50 x 6mm angle
  • Fully framed shells
  • Side and floor frames at 600mm, welded together for strength
  • Roof framing with 25 x 25 x 3 box section at 420 centres
  • Integral water tank – Stainless Steel tanks available at extra cost
  • Gas locker fully vented
  • Attachment for gas bottles
  • Built in fuel tank, size dependant on hull shape
  • Engine room fully ventilated
  • Return pipes with take off for diesel central heating
  • 1/4” Fuel Tank drain
  • Skin tank fully baffled (to suit engine)
  • Engine bed fully welded (to suit engine)
  • Welded in battery tray and wiring rails
  • Full set of bollards front and back
  • Sliding hatch (fully waterproof)
  • Half-glazed steel Bow doors
  • Steel framed side and back doors
  • Scroll work to bow
  • Grab hand rails to roof with scroll work front and back
  • Rubbing straights 2x50x12 convex fore and aft fully welded top & bottom
  • Self draining decks fore and aft.
  • Windows apertures cut to your requirements
  • Fully primed and 2 coats of blacking

Sailaway (as Hull) Plus

  • Fully fitted Beta Marine engine (engine size to suit boat)
  • 110AH Starter battery fitted
  • 5 Windows and 4 Portholes finished in either Chrome or Brass
  • Adequate Mushroom vents
  • 6 x Weld in type fender eyes
  • 4 x 2.5 kg Anodes welded on
  • Adequate ballast laid on a bitumen painted and felted base
  • Treated plywood floor throughout
  • Battoned and spray foamed cabin area to a minimum of 25mm
  • Sold as fully waterproof boat

Sailaway Lined (as Sailaway Plus)

  • Lined in light Oak – Ash & Maple available at extra cost
  • Hull sides lined in 9 mm veneered ply, Bow and stern bulk heads lined in 12mm
  • Cabin sides lined in solid wood framed panels with 9mm veneered ply boards
  • Deck head lined in 6mm
  • Bulk heads 18mm block board, 2 full, 1 half, as standard to your location
  • 12 volt wiring tails dropped behind panelling in conduit to your location
  • All 12 volt wiring is colour coded and is terminated in the lighting track ready for main feeds to be installed
  • 240 volt ring main wiring fitted
  • Sockets and switches to your location tails only

Fully Fitted (Sailaway Lined Plus)

  • Choice of reverse or traditional layouts
  • 12 volt LED lighting is used throughout the boat
  • 240 sockets and swathes to your location
  • Victron 3kw miltiplus inverter/120A battery charger combi
  • 4 x 135ah domestic batteries
  • 4 kw Eberspacher diesel-fired central heating
  • 3 fin rads, 1 towel rail as standard
  • Hot water via 55lt twin coil calorifier connected to the engine
  • 240 volt emersion heater
  • Fresh water supplied by Stainless Steel water tank
  • Bedroom fixed double bed with three large drawers
  • One full size wardrobe
  • Corner TV unit
  • Sprung mattress supplied
  • Full size 800 x 800 quadrant shower with a Showerwall waterproof paneling system
  • 12 volt cassette toilet
  • Vanity unit with solid Oak worktops
  • Stand alone porcelain sink and contemporary chrome taps
  • Open plan lounge
  • Solid fuel stove
  • 24” TV/DVD fitted in a solid timber unit
  • Stoves 500 DIT oven
  • Shoreline fridge with small freezer compartment
  • Stainless steel sink
  • Solid Oak worktops
  • Solid Oak flooring throughout except the bathroom which is cushion floor
  • Hand painted in the colours of your choice
  • 7 coats of paint: 2 primer, 2 under coat and 3 top coats of Yacht enamel
  • Hull to have 3 coats of blacking

    All boats come fully RCD compliant and with a four year BSS certificate 

    Please ask about our fully bespoke build service!